Fibre
-
Splice Bridge and Protector
A compact 12 way Splice Bridge which provides an effective means to store up to 12 Fusion Splice Protectors. Ideal for use in patch panels or wall enclosures. The bridge can be fixed to any flat clean surface using the self adhesive pads on the base....
-
Lapping Film
A complete range of high quality aluminium oxide lapping film for connector polishing. Sheet size is 250 x 280mm....
-
Self Adhesive Twist Clips
Kurly-Lok self adhesive cable clips are ideal for securing and routing fibre within patch panels and wall boxes. Designed with rounded edges that will not damage the fibre....
-
Cable Glands with Strain Relief
Compression glands are used to provide strain relief for cables as they enter patch panels and wall boxes. The glands are resistant to both benzene and oil.The gland is supplied with a lock nut as standard. Cable diameters from 2.6mm to 14mm can be accommodated....
-
Isopropyl Alcohol (IPA)
Isopropyl alcohol is used on lint free wipes to remove grease and dirt from optical fibres during splicing and termination. It is recommended that the fluid is decanted into fluid dispensers before use.Please note that IPA is highly flammable and should be used only in well ventilated are...
-
Excel Cold Cure Termination System - Connector Packs
The Cold Cure Connector Packs Include either ST or SC connectors and 900um boots together with sufficient adhesive and activator to terminate approximately 200 connectors....
-
Disposal Bins
Disposal Bins should be used to store fibre ends after cleaving and general cable preparation. With sealable lid....
-
Cleaning Wipes
Pre-saturated Cleaning Wipes IPA - Non abrasive lint free wipes are used to clean fibre and connectors prior to installation, pre-saturated with ISO propyl alcohol in order to eliminate problems with the transportation and use of solvents on site. Supplied in Packs of 80 individually sealed sache...
-
Blanking Plugs
Blanking plugs can be used in part loaded panels to ensure a tidy and professional installation....
-
Epoxy Syringe and Needle
Hand held needle and 3cc syringe sets, used to load connectors with epoxy prior to termination. 1" 20 gauge needle included....
